25.1. Starting the working mode
The <
Weighing> mode is the standard working mode. If a user
has changed the operating mode to another follow the actions below:
• While in the main window press the icon with mode name placed on
the top bar on the left then submenu comprising all accessible working
modes <Working Modes> opens,
• Choose <
window displaying icon
25.2. Local setting of a working mode
Local setting of a working mode <
a hot key <
Local parameters>:
Save Mode
Down-weighing
Checkweighing
Tare mode
Labelling mode
Statistics
26. WORKING MODES – PARTS COUNTING
Parts counting is working mode allowing to count pieces on the basis of the
standard unit mass of a single piece set on the scale or fetched from the
database.
Notice:
If parts counting is performed in an additional container it should be tarred.
Weighing>, program automatically returns to the main
in the top bar.
Detailed description in ch. 24.2 of the user manual
Detailed description in ch. 24.3 of the user manual
Detailed description in ch. 24.4 of the user manual
Detailed description in ch. 24.5 of the user manual
Detailed description in ch. 24.6 of the user manual
Detailed description in ch. 24.7 of the user manual
Weighing> are accessible on pressing
92