Inscribing The Unit Mass To The Database; Working Modes - Percent Setup (Deviations); Starting The Operating Mode - RADWAG WPY User Manual

Procedure:
• While in <
• Using
Notice:
The selected product has to have declared unit mass (single piece mass).

26.6. Inscribing the unit mass to the database

The unit mass can be described a unit mass the following way:
a) Estimate the unit mass (see 26.2 and 26.3),
b) Enter the products database
c) Keep the finger pressed on the required position then a context
menu is displayed,
d) Choose option <Ascribe standard>, then the standard unit mass
is attributed to the product in the field <Mass>.
Notice:
Attributing a standard to a selected product is also possible by
programmable button. Setting programmable buttons is described in ch.
17.2 of this manual The list of functions is described in APPENDIX B
of this manual.
27. WORKING MODES – PERCENT SETUP (DEVIATIONS)
The program allows to check weighings in deviations (in %) around an
outlined standard mass. The standard mass can be outlined by weighing
or entering it by a user.

27.1. Starting the operating mode

Procedure:
• While in the main window press
you will see a submenu <Working Modes> comprising a list of modes,
Parts counting > press
or choose a product and confirm it by pressing
,
,
in the top bar of the window then
97
.