Automatic Triggering Of Cumulative Labels - RADWAG WPY User Manual

Procedure:
• Enter parameters group <
of this manual,
• Enter the required working mode and choose: „
No. of CC labels", then the editing field <No. of CC labels>
with the screen keyboard is opened,
• Enter the required number od cumularive labels and confirm
by pressing

24.6.4. Automatic triggering of cumulative labels

Users have access to the function of automatic triggering of printing
cumulative labels after setting parameters <
< Threshold>.
Procedure:
• Enter <
in chapter 24 of the manual,
• Enter the required working mode and choose: „
C label automatic triggering /
required option:
None
Mass
Number
*) Manual printing of cumulative labels can be done in two ways
depending on the button used:
.
Working modes> parameter group as described
- Cumulative label printout is initiated by pressing
or
- Cumulative label printout is initiated by exceeding the
value set in parameter <
is treated as the total from single weighings,
- Cumulative label printout is initiated by exceeding the
value set in parameter <
is treated as the number of single weighings.
Working Modes> according to ch. 24
Mode" and then set the
*
,
88
Labelling mode /
Mode> and
Labelling mode /
Threshold>. The value
Threshold>. The value