Setting Up Lan Communication - IDK MSD-701UHD Command Reference Manual

2.2.3 Setting up LAN communication

(1) Connect the MSD and the control device via a LAN cable.
(2) Set up LAN communication as follows:
・Set IP address and subnet mask
・Operation mode of LAN communication: "RECEIVER"
・TCP pot number: 23, 1100, 6000 to 6999
(3) Establish the connection from the control device to the IP address and TCP port that are set to the
MSD in step (2) above.
(4) Send a communication command from the control device to the MSD in order to check the control
status of the MSD.
Step (2)
■ Operation example of LAN communication
Laptop
Communication
command to MSD
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
Step (1)
LAN cable
[Fig. 2.5] Setting LAN communication
Twisted pair cable
LAN cable
Outputs control command
Switching hub
Connection
1 2 3 4
Controller
[Fig. 2.6] LAN communication
Step (4)
Commu nicatio n
comma nd
HDC
LAN cable
series
receiver
to external device
5 6 7 8
【Reference: User's Guide】
Step (3)
Laptop
(Controller)
Projector
9