•
Alarm
This value is
ble.
•
Voltage
The +5V-switching regulator's output voltage.
•
+12V
This value is
+12V switching regulator that supplies power to its Tape Drive.
•
Alarm
This value is
ble.
•
Voltage
The +12V-switching regulator's output voltage.
•
Inrush Limiter
The Inrush Limiter must be
operate.
•
Alarm
This value is
•
Voltage
The Inrush Limiter's output voltage.
•
Termination
This value is
SCSI Termination Power signal.
•
Alarm
This value is
•
Temperature
The temperature inside the Drive Carrier in degrees Celsius.
•
Alarm
This value is
5.4.17 The Private\Drive Bay\C?\DIA status screen
The
Private\DriveBay\C?\DIA
selected (C?) Drive Interface Adapter (DIA) board. The following data is displayed:
5-24
if the +5V-switching regulator's output voltage is unaccepta-
ON
if the RLS has commanded the Drive Carrier to turn on its
ON
if the +12V-switching regulator's output voltage is unaccepta-
ON
for the +5V and +12V switching regulators to
ON
if the Inrush Limiter's output voltage is unacceptable.
ON
if the RLS has commanded the Drive Carrier to energize the
ON
if SCSI Termination Power voltage is unacceptable.
ON
if the temperature is unacceptable.
ON
P•Drivebay•C?••••DIA
Type:
dddddddddd
Control:
Status:
status screen displays all of the status for the
The Private Menu
d
d
501510 Rev. S