tify the process for recycling the materials and components that make up a Qualstar
tape library.
Tools required
•
P1 and P2 Phillips head screwdrivers
•
T20 Torx head screwdriver
•
Hex head (Allen) wrench/driver set
•
1/4-inch hex nut driver
Disassembly procedure
1.
Remove door.
2.
Remove top panel.
3.
Remove side external panels.
4.
Remove internal subassemblies.
Items recyclable using conventional methods
•
Aluminum: Door, exterior panels, frame, robotics
•
Stainless steel: Robot guides
•
Steel: Some frames, fasteners
•
Plastic: Window, cartridge magazines, tape cassettes
•
Copper: Internal wiring, motors, SCSI cables
•
Paper: Manuals
Items requiring special disposal due to lead-based solder
•
Printed Circuit Boards: Controller, miscellaneous small printed circuit
boards
Items that may have salvage or resale value
•
Tape drives
•
EMI line power filter
Qualstar is committed to the implementation of RoHS (Restriction of the use of cer-
tain hazardous substances in electrical and electronic equipment) in accordance with
501510 Rev. S
End of Life Instructions
Reduction of Hazardous Substances (RoHS)
v