Table of Contents
Advertisement
•
Pcb
The part number of the Sensor Master board (see Table 5-8).
•
DoorLocked
A value of 1 indicates the Front Panel/Door is locked by the keylock.
The following items are sub-menus with status values that indicate the sensor's state.
The sub-menus are intended for use only by Qualstar personnel.
•
Drive?
A value of 0 indicates a tape is present in the mouth of the drive but not fully
inserted. This sensor detects the ejection of a tape by the drive.
•
Fixed?
A value of 0 indicates a tape is present in the indicated fixed slot if the Gripper
is in its home position.
•
Gripper Home
A value of 1 indicates the gripper jaws are closed.
•
Magazine??
A value of 0 indicates a magazine is present at the current access position of
the Carousel or Storage Array.
•
MagazineSlot? (1-5)
A value of 0 indicates a cartridge is present in the indicated magazine slot of
the currently accessible magazine of the Carousel or Storage Array. See Table
5-9.
•
Xclear
A value of 0 indicates the X-Axis path is blocked while a 1 indicates it is clear
to move the carriage horizontally.
•
Xhome
A value of 1 indicates the Handler's carriage is at its fully right or home posi-
tion.
•
Zhome
A value of 0 indicates the Handler's gripper is fully retracted to its home posi-
tion along the Z-Axis.
PCB
P/N
501887
501727
501867
501787
Table 5-8 Sensor Master board usage
501510 Rev. S
Models Used On
RLS-4124, 4221
RLS-44xx
RLS-5116, 8116, 8216H
RLS-5244, 6227, 8236, 8236D, 8202, 8204, 8204D,
8244, 8244D, 8404, 8404D, 8444, 8444D
The Private Menu
5-29
Advertisement
Table of Contents
