The Maintenance\Display Voltage Status Screen - Qualstar RLS-4470 Technical & Service Manual

Tape library; rls-4000 series; rls-5000 series; rls-6000 series; rls-8000 series;
Table of Contents

Advertisement

Filter
This value is the number of minutes since the Air Filter was last changed.
Grips
This value is the number of times that the cartridge Gripper mechanism has
been cycled.
Minutes
This value is the number of power-on minutes.
Moves
This value is the number of cartridge moves.
Picks
This value is the number of times that a cartridge has been removed from a
drive or storage location.
Places
This value is the number of times that a cartridge has been placed into a drive
or storage location.
PowerOn
This value is the number of times that the power has been turned on.
Resets
This value is the number of Executive CPU resets, including power-on resets
and SCSI bus resets.
S Cmnds
This value is the number of SCSI commands received by the RLS.

4.5 The Maintenance\Display Voltage status screen

The
Display Voltage
The +24V supply is the incoming voltage to the Executive PCBA from the power sup-
ply module(s). The +5V and +3.3V supplies are the output of the switch-mode regula-
tor on the Executive PCBA.
501510 Rev. S
M••••Display Voltage
+3.3V:
dd.dd
+5V:
dd.dd
+24V:
dd.dd
status screen displays the current power supply voltages.
The Maintenance Menu
4-5

Advertisement

Table of Contents
loading

Table of Contents