Table of Contents
Advertisement
A series of leading dots
indicates that the next
higher menu is the Top
Menu.
Figure 3-4 The Operation Menu
3.5 Menu Elements
3.5.1 Menu Items
Line 1 of any menu display always indicates the name of the menu right justified,
with the exception of the Top Menu, where menu names are left justified. The name
of, or an acronym for, the parent menu will precede the menu name and will be left
justified. Bullets fill the space between the two menu names. Examples:
LINE 1 DISPLAY
Top Menu
•••••••Configuration
CA•••••Control Panel
CA•Changer•Inventory
OES••••••••••Display
Lines 2 through 4 of any menu display may contain the following items:
Menu Name
Command Name
Value Name
Menu Name
with Status
3-8
Display line one gives the title of the current menu or function.
The RLS will always try to spell out menu names as completely
as possible in the 20 characters available.
INTERPRETATION
Top Menu
Configuration Menu
Configuration\Advanced\Control Panel Menu
Configuration\Advanced\Changer\Inventory Menu
Operation\Element Status\Display Menu
A Menu Name is displayed with a single leading bullet
and an upper/lower case name. Example:
.
Maintenance
A Command Name is displayed in all upper case letters
without a bullet or colon. Example:
SET TO DEFAULTS
A Value Name is displayed with an initial capital let-
ter, a colon after the name, followed by a right-justified
value field. Example:
Contrast:
48
There are a few Menu Names that are followed by a
status message. This is indicated by colon after the
menu name followed by the status message, which
summarizes the state of the sub-menu about to be en-
tered. The status message is not editable. Example:
The Operator Interface
501510 Rev. S
Advertisement
Table of Contents
