5.2.2 Master Lock
The
Master
, the RLS' control keys cannot be used to change the RLS' configuration, initiate
ON
any operations, or execute any commands. Only the host system can control the RLS,
which effectively configures the RLS for remote operation only.
5.2.3 Disabling the Master Security Lock
See the RLS-8000 Tape Library Installation and Operation Manual (Qualstar document
number 501500) for details about the RLS Security options.
Follow the instructions below, which assume that all RLS security locks are set to
to disable the
1.
Open the Front Panel/Door (to disable the
2.
Press the MENU key to display the
3.
Press the ENTER key once to enter the
4.
Use the
5.
Press the ENTER key to enter the
6.
Use the
7.
Press the ENTER key once to begin editing the
8.
Use the
9.
Press the MENU key twice to leave the menu system.
5-4
lock provides the maximum system security. When the
security lock.
Master
Top Menu
•Configuration
•Maintenance
•Operation
•••••••Configuration
•Advanced
•Drive
SCSI ID:
•Security
SET TO DEFAULTS
(DOWN) key to move the pointer to
C•••••••••••Security
Configuration:
Inventory:
Master:
(DOWN) key to move the pointer to
(DOWN) key to change the
The Private Menu
NOTE
lock).
Door
.
Top Menu
\Configuration
dd
.
Security
menu.
C\Security
ON
ON
ON
.
Master
value.
Master
value from ON to OFF.
Master
lock is
Master
,
ON
menu.
501510 Rev. S