Table of Contents
Advertisement
Passwords are case-sensitive. Be sure to use the correct capital and lower-case letters
while
setting passwords.
1.
Turn the power on.
2.
Press the MENU key to display the
3.
Use the
4.
Press the ENTER key to enter the
5.
Use the
6.
Press the ENTER key to enter the
Maintenance\Test LC Display
7.
Press and release the
8.
This step must be executed quickly (within 1.5 seconds). Sequentially press and
hold down the
(Do not press all three control keys at the same time.)
9.
Simultaneously release the three control keys. If the
this point, repeat steps 3-8 above to display the Private menu.
10.
The Private menu should now be displayed.
11.
If necessary, use the
501510 Rev. S
Top Menu
•Configuration
•Maintenance
•Operation
•Private
Top Menu
•Configuration
•Maintenance
•Operation
(DOWN) key to move the pointer to
•••••••••Maintenance
•Display Log
•Display Prevents
•Display Reservs.
•Display Revision
•Display Sense
•Display Stats.
•Display Voltage
•Test Inventory
•Test Keyboard
•Test LC Display
(DOWN) key to move the pointer to
(DOWN) key once.
(DOWN), ENTER and MENU control keys, in the order shown
(DOWN) key to move the pointer to
The Private Menu
NOTE
.
Top Menu
Maintenance
menu.
Maintenance
Test LC Display
menu.
Top Menu
.
.
reappears at
.
Access
5-7
Advertisement
Table of Contents
