Table of Contents
Advertisement
3.3.2 OPEN & PARK RIGHT command
The OPEN & PARK RIGHT command will not appear if the Front Panel/Door is locked by
the Door Lock or by a Prevent Media Removal command from a host computer.
The
OPEN & PARK RIGHT
the carriage to its far right position. This command should be used when accessing
the Carousel or Storage Array. After the carriage has stopped, gently pull the Front
Panel/Door open.
3.3.3 OPEN VIOP (n) command
The OPEN VIOP command will not appear if it is locked by a Prevent Media Removal
command from a host computer.
The
OPEN VIOP
been configured. If the RLS has been configured for more than one logical library,
then the command appears for each logical library (ex.
for an RLS configured for two logical libraries). Invoking this command
VIOP b
causes the Carousel or Storage Array to position the VIOP magazine for the selected
logical library to the access position. It then opens the VIOP door.
The operator must manually close the VIOP door before the RLS can again execute
host commands.
3.3.4 PARK LEFT command
This command moves the carriage to its far left position. This is useful for observing
the Tape Drives.
3.3.5 PARK RIGHT command
This command moves the carriage to its far right position.
501510 Rev. S
NOTE
command will unlock the Front Panel/Door and move
NOTE
command only appears in the menu when a Variable VIOP has
The Operator Interface
OPEN VIOP a, OPEN
3-5
Advertisement
Table of Contents
