Table of Contents
Advertisement
key while the Top Menu is displayed to exit the Menu mode and return to the operat-
ing display.
3.2.5 The
(Daisy) Key
If the menu system is not already active, pressing the
Quick Operation
menu system.
3.3 Quick Operation Menu
The
Quick Operation
RLS status screen is displayed it (cannot be opened while navigating the RLS menu
system).
The
Quick Operation
eral menu tree structure. It works differently in that it contains only commands and
dismisses itself after executing one of its commands. Simply point to one of the
Quick Operation
and dismiss the
the EXIT, MENU or
3.3.1 OPEN & PARK LEFT command
The OPEN & PARK LEFT command will not appear if the Front Panel/Door is locked by
the Door Lock or by a Prevent Media Removal command from a host computer.
The
OPEN & PARK LEFT
carriage to its far left position. This command should be used when accessing the
Tape Drives. After the carriage has stopped, gently pull the Front Panel/Door open.
3-4
menu. Press the
menu is opened by pressing the
menu contains only commands and is not part of the gen-
commands and press the ENTER key to invoke the command
menu. You can also exit the menu by pressing
Quick Operation
(Daisy) key.
OPEN & PARK LEFT
OPEN & PARK RIGHT
OPEN VIOP
OPEN VIOP n
PARK LEFT
PARK RIGHT
(UN)LOAD LIBRARY
NOTE
command will unlock the Front Panel/Door and move the
The Operator Interface
(Daisy) key will open the
(Daisy) or MENU key twice to close the
(Daisy) key when the
501510 Rev. S
Advertisement
Table of Contents
