Model Expansions; Installing A Model Expansion Kit - Qualstar RLS-4470 Technical & Service Manual

9.2 Model Expansions

The expansion kit P/N 500829-07-2 should take less than 30 minutes to install.
Installing an expansion kit is a five–step procedure:
1. Install the new hardware.
2. Enter
model number and recalibrating the RLS are password-protected procedures.)
3. Reconfigure the library's model number to reflect the hardware changes.
4. Recalibrate the library.
5. Clear the password (
menu.

9.2.1 Installing a Model Expansion Kit

This procedure requires one expansion kit (P/N 500829-07-2), which includes a Stor-
age Array and Sensor Slave Assembly. RLS libraries will have one of two differing
chassis configurations. Check the rear of the library to determine which style it is.
See Figure 9-1.
Style A
Figure 9-1 RLS Chassis Styles
A style chassis have a solid rear, while style B has an access plate that is secured to
the library with six screws. Follow the appropriate Storage Array Removal / Expan-
sion instructions after determining if the library has a style A or B chassis.
9-2
for the password in the Private menu. (Reconfiguring the RLS
Update
) to prevent unauthorized access to the Private
Update
Solid Rear
RLS Expansions
Style B
Access Panel
501510 Rev. S