Qualstar RLS-4470 Technical & Service Manual page 79

5.4.8.2 The Private\Configurations\Defaults status screen
All items in this menu are locked by both the Master Security Lock and the Configuration
Lock.
The items in this menu are used to create custom default data for various menu sys-
tem items.
Example 1: The default text used on line 1 of the main display for an RLS-4221 is
Qualstar RLS-4221
text) for the main display line 1 over the SCSI bus, or by using the
Configuration\Advanced\Control Panel\Display
these methods is used, and the operator then executes the Configuration menu's
SET TO DEFAULTS
text (
Qualstar RLS-4221
Example 2: The
and
1-10 11-20
play. Unlike Example 1, text data entered in the
comes the new system default data. Therefore, the custom data entered in this menu
is also used as the system's default data when an operator executes the Configuration
menu's
SET TO DEFAULTS
• SCSI Vndr
Allows for vendors or resellers name to be entered which will replace the sys-
tem's default menu display text (
• SCSI Prod
Allows for vendors or resellers product name to be entered which will replace
the system's default menu display text (
501510 Rev. S
PC••••••••••Defaults
LCD Line 1:DEFAULT
1-10: ??????????
11-20: ??????????
LCD Line 2:DEFAULT
1-10: ??????????
11-20: ??????????
LCD Line 3:DEFAULT
1-10: ??????????
11-20: ??????????
LCD Line 4:DEFAULT
1-10: ??????????
11-20: ??????????
SCSI Vndr:????????
SCSI Prod:????????
????????
SCSI Revision:????
CLEAR
NOTE
. However, an operator can enter custom data (e.g., different
command, the custom text data is lost and the system's default
) is displayed again.
Private\Defaults\LCD Line 1
, can also be used to change the text used on line 1 of the main dis-
command.
Qualstar
The Private Menu
menu. If either of
menu item, and its sub-items
Private\Defaults
).
).
RLS-4221
menu be-
5-15