5.3.3 Clearing the Password
Clearing (removing) the current password prevents unauthorized personnel from ac-
cessing the
word should always be removed after the service technician finishes using
the Private menu.
Three things happen when a user clears the password:
•
Private
•
Access
•
CLEAR ACCESS
menu.
1.
Press the MENU key to open the
2.
Use the
3.
Press the ENTER key to enter the
4.
Use the
5.
Press the ENTER key to execute the
6.
Press the MENU key twice to exit the menu system.
The password is now cleared. Notice that
Top Menu
501510 Rev. S
menu and accidentally disabling the RLS. The current pass-
Private
disappears from the
reappears in the
Private
(shown in Section 5.3.3) disappears from the
(DOWN) key to move the pointer to
•••••••••••••Private
Access: ??????????
•Adapter
•Cabling
•Calibration
CALIBRATE
CLEAR ACCESS
•Configuration
•Control Panel
•Display A/D
•Display Locations
•Display Positions
•Drivebay
•Executive
•I2c
•Magazine
OPEN VIOP WINDOW
REBOOT
RESET SCSI BUS
•Sensor
(DOWN) key to move the pointer to
.
The Private Menu
.
Top Menu
menu.
.
Top Menu
.
Private
menu.
Private
CLEAR ACCESS
command.
CLEAR ACCESS
is no longer visible in the
Private
Private
.
5-9