Figure 36 Drive Status - Qualstar Q48 Installation And Operation Manual

Q24/Q48 Tape Library
This page provides detailed information about all drives that are present in the library.
3.2.6.2 Viewing the dynamic drive status
If multiple tape drives are installed in the library, the information will be shown by selecting it from
the pull down menu.
The following information is displayed:
1. Drive status:
• Status = Indicates whether drive is ready for use
• Cartridge in Drive = Indicates whether the drive contains a tape cartidge
• Drive Error Code
• Drive Temperature
• Cooling Fan Active
• Drive Activity
• Drive Port = Information relevant to the specific drive interface (FC or SAS)
2. Additional drive information (up to 4 half-height tape drives for a Q48)
© Copyright QUALSTAR 2015
Figure 37 Drive status
Installation and Operations Manual
43