Q24 Tape Library
3.2.6.2
Viewing the dynamic drive status
This page provides detailed information about all drives that are present in the library.
If multiple tape drives are installed in the library, the information will be shown by selecting it from
the pull down menu.
The following information is displayed:
1. Drive status:
Status = Indicates whether drive is ready for use
Cartridge in Drive = Indicates whether the drive contains a tape cartidge
Drive Error Code
Drive Temperature
Cooling Fan Active
Drive Activity
Drive Port = Information relevant to the specific drive interface (FC or SAS)
2. Additional drive information (up to 2 half‐height tape drives)
© Copyright QUALSTAR 2014
Figure 35 Drive status
Installation and Operations Manual
38