Table of Contents
Advertisement
3.
3.1 The Door Lock
The Door lock is used to secure the RLS inventory and menu system. When in the
locked position, the Front Panel/Door cannot be opened under any conditions. When
in the unlocked position, the Front Panel/Door can be opened if the RLS has not re-
ceived a Prevent Media Removal command from a host computer. The key can be re-
moved from the door lock in either position. All Qualstar tape libraries use the same
key.
Figure 3-1 Door Lock Positions
3.2 Using the Menu System
The Control Panel shown in Figure 3-2 allows a qualified individual to make configu-
ration changes to the RLS and to perform diagnostics. This chapter explains the
menu system, the types of information it presents, and how to use it. Specific infor-
mation about Configuration or Operation menu items can be found in the RLS-8000
Tape Library Installation and Operation Manual (Qualstar document number
501500).
The six control keys make it possible to point to a particular item and change or edit
its value, or to execute a command. The function of each control key is dependent up-
on the location within the menu structure. The control keys are shown in Figure 3-2.
501510 Rev. S
The Operator Interface
The Operator Interface
3-1
Advertisement
Table of Contents
