Edid (Extended Display Identification Data); Edid - IDK MSD-501 User Manual

MSD-501/502/701/702 User's Guide

7.10 EDID (Extended Display Identification Data)

You can set or customize EDID to be sent to the source device. Change the setting as needed.
■Setting EDID
(1) If you use copied EDID, copy the target EDID from the sink device.
(2) Set the EDID that will be sent to the source device.
(3) If you use built-in EDID, customize the data as usage.
Blu-ray player

7.10.1 EDID

Menu Top→EDID→EDID DATA
Setting for Each input (only digital input)
Setting value
・INTERNAL EDID [Default]
・OUT1A MONITOR
・OUT1B MONITOR
・COPY DATA1 to COPY DATA8
You can set the EDID to be sent to the source device from built-in EDID ("INTERNAL EDID"), connected sink
device's EDID ("MONITOR") and copied EDID ("COPY DATA").
EDID copied from a sink device will be displayed if any.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
60
Built-in EDID
Changing input resolution for PC
Changing input resolution for AV
Changing Deep Color input
Changing audio format
Changing speaker configuration
External EDID OUT1A
External EDID OUT1B
External EDID OUT2A
External EDID OUT2B
Copied EDID 1
Copied EDID 2
IN 1
Copied EDID 3
Copied EDID 4
IN 7
Copied EDID 5
Step (2) Copied EDID 6
Copied EDID 7
Copied EDID 8
[Fig. 7.12] Setting EDID
・OUT2A MONITOR
・OUT2B MONITOR
devices
Step (3)
OUT 1A
OUT 2B
Step (1)
LC monitor
【See:7.10.7 Copying EDID】