Example Of Setting Parameters 2-2 - Mitsubishi Electric CR750-Q Instruction Manual

5.15.4 Example of setting parameters 2-2

(When the data link function is used: When the controller is the client)
Shows the example of the setting, when the controller is client by the data link function.
Item
Robot controller IP address
Personal computer IP address
Robot controller port No.
Communication line No.
Open command COM No.
Parameter name to be
changed
NETIP
NETPORT
CPRCE13
COMDEV
NETMODE
NETHSTIP
Next, set the personal computer IP address to 192.168.0.2. Set this value on the Network Properties
screen.
Windows XP (lower left screen), Windows Vista (lower right screen)
The personal computer IP address is set with the Windows TCP/IP Property Network setting (property in
network computer). Because the set-up screen differs with versions of Windows, refer to the manuals
enclosed with Windows, etc., for details on setting this address.
Refer to the instruction manuals enclosed with the personal computer support software for details on setting
and using the personal computer support software.
Setting value
192.168.0.20
192.168.0.2
10003
COM3:
Before/after change
Before 192.168.0.20
After 192.168.0.20 (With the default value.)
Before 10000,10001,10002,10003,10004,10005,10006,10007,10008,10009
10000,10001,10002,10003,10004,10005,10006,10007,10008,10009
After
(Default value)
Before 0
After 2
Before RS232, , , , , , ,
After RS232, , OPT13, , , , ,
Before 1,1,1,1,1,1,1,1,1
After 1,1,0,1,1,1,1,1,1
192.168.0.2, 192.168.0.3, 192.168.0.4, 192.168.0.5, 192.168.0.6,
Before
192.168.0.7, 192.168.0.8, 192.168.0.9, 192.168.0.10
192.168.0.2, 192.168.0.3, 192.168.0.2, 192.168.0.5, 192.168.0.6,
After
192.168.0.7, 192.168.0.8, 192.168.0.9, 192.168.0.10
5Functions set with parameters
Parameter value
About the communication setting (Ethernet) 5-493