Protection Of The Program (Protect) - Mitsubishi Electric CR750-Q Instruction Manual

3Explanation of operation methods

(5) Protection of the program (Protect)

1) Select the protect menu
Press the function key corresponding to the "PRTCT" by program list display. Display the protect
screen. If the "PRTCT" menu is not displayed, press and display the [FUNCTION] key
<FILE/EDIT> 1/
1 08-04-24 17:20:32 22490
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
RENAME DELETE
2) Setup of the protection.
The protection of the program can specify the command and data (variable value) separately.
If it sets up protection of the command, press the function key corresponding to "CMD." If it sets up
protection of the data, press the function key corresponding to "DATA".
<PROTECT>
NAME ( 1
CMD. DATA 123
<PROTECT>
NAME ( 1
CMD. DATA
If the function key corresponding to "ON" is pressed, it will be set up for "protecting." If the function
key corresponding to "OFF" is pressed, it will be set up for "not protecting."
<PROTECT>
1
SET COMMAND PROTECT.
ON
<PROTECT>
1
SET DATA PROTECT.
ON 123
3-66 Operating the program control screen
20 Rem 136320
694
2208
1851
CLOSE
123 PRTCT ⇒
) protect
COMMAND : OFF
DATE : OFF
CLOSE
) protect
COMMAND : OFF
DATE : OFF
123 CLOSE
123 OFF
OFF
<PROTECT>
NAME ( 1 ) protect
COMMAND : OFF
DATE : OFF
DATA 123
CMD.
<PROTECT>
1
SET COMMAND PROTECT.
123
ON
<PROTECT>
1
SET DATA PROTECT.
ON 123
<PROTECT>
NAME ( 1
COMMAND : OFF
DATA
CMD. 123
CLOSE
OFF
OFF
) protect
DATE : OFF
CLOSE
ON :protecting
OFF:not protecting