Operating The Program Control Screen; Program List Display - Mitsubishi Electric CR750-Q Instruction Manual

3Explanation of operation methods

3.12 Operating the program control screen

Here, explain the operation method of the following related with program management.

"(1)Program list display"

"(2)Copying programs"
"(3)Name change of the program (Rename)"
"(4)Deleting a program (Delete)"
"(5)Protection of the program (Protect)"
(1) Program list display
This functions allows the status of the programs registered in the controller to be confirmed.
1) Select the Management/edit menu
Press the [1] key in the menu screen. "1. FILE/EDIT" are selected and display the list of the pro-
grams.
<MENU>
1.FILE/EDIT
3.PARAM.
5.SET/INIT.
Display the <FILE/EDIT> screen [1]
Same operation can be done, even if the cursor is moved to "1. FILE/EDIT" by the [ ↑ ] or [ ↓ ] key
and it presses the [EXE] key.
And, the program which is the target of each operation can also be selected.
The menu ("EDIT", "POSI.", "NEW", "COPY") corresponding to the function key is displayed under
the screen.
Press the [FUNCTION] key, then display the "RENAME", "DELETE", "PRTCT", "CLOSE".
3-62 Operating the program control screen
2.RUN
4.ORIGIN/BRK
6.ENHANCED
123
CLOSE
<FILE/EDIT> 1/20 Rem
1 08-04-24 17:20:32
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
POSI. 123 NEW
EDIT
136320
22490
694
2208
1851
COPY ⇒