Copying Programs - Mitsubishi Electric CR750-Q Instruction Manual

(2) Copying programs

1) Select the copy menu
Press the function key corresponding to the "COPY" by program list display. Display the copy screen.
<FILE/EDIT>
1 08-04-24 17:20:32
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
POSI. 123
EDIT
2) Specification and execution of the program to copy.
In the parenthesis of the copied source, the program name beforehand selected by the program list
screen is displayed. (The figure the program name "1") If it changes, move the cursor by the arrow
key.
Input the program name copied in the parenthesis of the copy destination, and press the [EXE] key.
<PROGRAM COPY>
SRC.NAME ( 1
DSR.NAME ( 21
123
Protected information is not copied
The program protection information and variable protection information is not copied with the copy opera-
tion.
Reset this information as necessary.
1/20 Rem 136320
22490
694
2208
1851
NEW COPY ⇒
)
)
CLOSE
3Explanation of operation methods
<PROGRAM COPY>
SRC.NAME ( 1
DSR.NAME (
123
<FILE/EDIT> 1/
1 08-04-24 17:20:32 22490
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
EDIT POSI. 123
Operating the program control screen 3-63
)
)
CLOSE
20 Rem 136320
694
2208
1851
COPY ⇒
NEW