Mitsubishi Electric CR750-Q Instruction Manual page 665

■Edit FLG2
Edits the FLG2 value of selected path point at one time. To use this function, the RT ToolBox2 version 3.40S
or later is required.
To batch edit FLG2 values, select the path point data to be edited in the path point data list area, and right-
click. Click [Edit FLG2] in the context menu that appears to display an FLG2 batch editing screen.
(This screen can also be displayed by clicking [Edit] → [Edit FLG2] on the menu.)
Fig.7-57:Edit FLG2 screen
By changing multi-rotation data for each axis and clicking the [OK] button, changes are updated to the
selected path point. When the [Cancel] button is clicked, the FLG2 batch editing screen is closed without
updating changes.
■Edit tolerance
Edits the tolerance of selected path point at one time. To use this function, the RT ToolBox2 version 3.20W
or later is required.
To batch edit the amount of tolerance, select the path point data to be edited in the path point data list area,
and right-click. Click [Edit tolerance] in the context menu that appears to display the Tolerance batch editing
screen. (This screen can also be displayed by clicking [Edit] → [Edit tolerance] on the menu.)
Fig.7-58:Edit tolerance screen
By changing the amount of tolerance and clicking the [OK] button, changes are updated to the selected path
point. When the [Cancel] button is clicked, the Tolerance batch editing screen is closed without updating
changes.
■Circular interpolation
Edits the arc designation of the selected path point at one time. To use this function, the RT ToolBox2 ver-
sion 3.40S or later is required.
To batch edit the arc designation, select the path point data to be edited in the path point data list area, and
right-click. By clicking [Circular interpolation] in the context menu that appears, arc designation for the
selected path point turns ON and OFF. (The arc designation can also be edited by clicking [Edit] → [Circular
interpolation] on the menu.)
Spline interpolation Appendix-645
7Appendix