Mitsubishi Electric CR750-Q Instruction Manual page 659

Table 7-11:Details of added menus
Menu item
File
Edit
New An edit screen for creating a new spline file opens.
Open A dedicated screen for opening the spline file opens.
Close The active Spline File Edit screen closes.
Save The spline file being edited is overwritten and saved.
Save as A dedicated screen for saving spline file being edited with a dif-
ferent name opens.
Spline file The Spline file manager screen opens.
manager
Import
The path point data is imported from a CSV/MXV
file.
Export The path point data is exported to a CSV format file.
Properties The spline file Property screen opens for referring to and enter-
ing comments and changing file version.
Undo The editing details applied on the path point data last are
undone and the original details are restored.
Redo The details canceled with [Undo] are applied again.
Cut The selected path point data is saved as cut data. The original
path point data is cut out when [Paste] is executed.
Copy The selected path point data is saved as copy data.
Paste The path point data saved with [Cut] or [Copy] is pasted into the
designated path point data.
Copy - Posi- The selected position data is saved to be copied.
tion variable
Paste - Posi- The saved position data is pasted into the designated path
tion variable point data.
Insert New path point data is inserted in front of the selected path
point data.
Insert cop- The path point data saved with [Copy] is inserted in front of the
ied points designated path point data.
Select all All path point data is selected.
Delete The selected path point data is deleted.
Append New path point data is added to the end of the path point data.
Edit Editing of the selected path point data is enabled.
Edit FLG1 Edits the FLG1 value of selected path point at one time.
Edit FLG2 Edits the FLG2 value of selected path point at one time.
Edit toler- Edits the tolerance of selected path point at one time.
ance
Circular Switches the arc designation of the selected path point
interpolation between enabled and disabled.
Explanation
Note1)
Spline interpolation Appendix-639
7Appendix
Reference
page
627
635
-
649
648
651
659
format
662
647
664
664
662
662
662
663
663
641
663
-
644
641
643
644
645
645
645