Mitsubishi Electric CR750-Q Instruction Manual page 650

7Appendix
Entities with consecutive start points and end points for the previous and next entities are displayed
in blue from the first entity. Non-consecutive entities are displayed in purple.
Fig.7-32:Selecting entities
By selecting an entity from the [Entity list] and clicking the [UP] and [DOWN] buttons, the position of
the selected entity can be changed.
Fig.7-33:Selecting entities (Down)
By selecting an entity from the [Entity list] and clicking the [Reverse] button, the <Start point> and
<End point> of the selected entity can be reversed.
Fig.7-34:Selecting entities (Reverse)
When the [Sort] button is clicked, a confirmation dialog will appear.
Fig.7-35:Sort confirmation dialog
By clicking [Yes] at the confirmation dialog box, entities registered in the [Entity list] are sorted with
the first entity as a reference.
* If non-adjacent entities are registered in the [Entity list], those entities are deleted.
Fig.7-36:Selecting entities (Sort)
Appendix-630 Spline interpolation