Mitsubishi Electric CR750-Q Instruction Manual page 62

3Explanation of operation methods
Change of the command edit screen and the position edit screen.
If the function key corresponding to "CHANGE" is pressed, the command edit screen and the position edit
screen can be changed each other.
If the "CHANGE" is not displayed on the screen, it is displayed that the [FUNCTION] key is pressed. If "→"
is displayed at the right end of the menu, the state of changing the menu by pressing the [FUNCTION] key is
shown.
<PROGRAM> 1
1 Mov P1
2 Mov P2
3 Mov P3
4 Mov P4
CHANGE 123
DIRECT
The position variable of order can be called one by one by "Prev" (F3) and "Next" (F4). Usually, although it is
the call of only the position variable, change the function key and the call can do the joint variable by the
"NAME" (F2). After calling the joint variable, the joint variable of order can be called one by one by "Prev"
(F3) and If it displays to the head or the last by the joint variable, it will return to the position variable by the
next display.
3-42 Programming
Position edit screen
[F2]
Command edit screen
⇒
CLOSE
[F3]
<POS.> JNT 100% P5
X:＋128.56 A:＋180.00
Y: ＋0.00 B: ＋90.00
Z:＋845.23 C:－180.00
L1: L2:
FL1: 7 FL2:
MOVE TEACH 123 Prev
Prev Prev
MOVE MOVE TEACH TEACH CHANGE CLOSE
DELET NAME
0
⇒
Next
[FUNCTION] key
Next Next