Serial Utility Commands - Microscan MS-890 User Manual

Serial Utility Commands

Serial Utility Commands
Command Type
Read Rate
Counters
Device Control
Matchcode
Master Database
Firmware
Symbologies
Trigger
12-2
Command
<C>
<Cs>
<Cp>
<Cm>
<Ce>
<CPDF>
<J>
<N>
<O>
<T>
<U>
<V>
<W>
<X>
<Y>
<H>
<I>
<K500>
<K501>
<L1>
<L2>
<L3>
<E>
<F>
<G>
<Gn>
<Mn>
<Mn?>
<Mn,>
<!>
<!b>
<!a>
<!c>
<#>
<#b>
<#a>
<P>
<Q>
<R>
<S>
<char>
Name
Enter Read Rate Test
Enter Multisymbol Read Rate Test
Enter Percent Test
Enter Multisymbol Percent Test
Extended Read Rate
Enter Percent PDF Read Rate Test
Exit Read Rate and Percent Test
No Read Counter
No Read Counter Reset
Trigger Counter
Trigger Counter Reset
Good Read/Match Counter
Good Read/Match Counter Reset
Mismatch Counter
Mismatch Counter Reset
Enable Laser Scanning (Laser On)
Disable Laser Scanning (Laser Off)
Motor On
Motor Off
Programmable Output 1 Pulse
Programmable Output 2 Pulse
Programmable Output 3 Pulse
Enable Matchcode Type
Disable Matchcode Type
Store Next Symbol to Database Index 1
Store Next Symbol to Database Index n
Download Master Symbol Data to Database Index n
Display Master Symbol Data from Database Index n
Delete Master Symbol from Database Index n
Display Checksums for Boot Code and Application Code
Display Checksum for Boot Code
Display Checksum for Application Code
Display Checksum for Raster Code
Display Boot Code and Application Code Part Number
Display Boot Code Part Number
Display Application Code Part Number
Autodiscriminate All Symbologies
Enable Code 39 Only
Enable Codabar Only
Enable Interleaved 2/5 Only
Serial Trigger Character
MS-890 Industrial Automation Scanner User Manual