Microscan MS-890 User Manual page 283

Restore Microscan Defaults to Active Memory and Power-On
Caution: Defaulting the scanner to Microscan default settings will overwrite user-saved
settings.
• Restores Microscan defaults to memory.
• Restores Microscan defaults to user-saved settings for power-on.
• Initializes serial configuration commands in active memory and resets counters to zero.
Restore Microscan Defaults to Active Memory and Power-On
Send <Zd> command to the scanner.
Restore Microscan Defaults to Active Memory and Power-On by ESP
1. Right-click in the configuration window and select Default All ESP Settings.
2. Right-click and select Save to Reader and Send and Save.
Restore Microscan Defaults by Hardware Default
There is no hardware default for the MS-890. Default commands can be entered from any
of the host connectors. Since the default communications settings on the 9-pin connector
are fixed, you can always send a default the scanner through this port with a software
command.
MS-890 Industrial Automation Scanner User Manual
Appendices
A-19