Configuration Database - Microscan MS-890 User Manual

Configuration Database

Configuration Database
Configuration Database by Serial Command
Note: You can also set Focus,
Laser Framing, and
Definition: The Configuration Database allows the user to save multiple scanner
configuration settings. The database can be used to save the most com-
monly used configurations, making the scanner easily adaptable to changing
applications, or it can be used in conjunction with
change configurations dynamically.
When Optoelectric Control is set to
Mode), the first seven indexes can be switched by external inputs. Each
database configuration setting is assigned to a control trigger sequence.
The table below illustrates the relationship between control trigger
sequence and database indexes.
Index
1
2
3
4
5
6
7
0 = Inactive Input State
1 = Active Input State
<K227,database index,focus position,gain,tracking,AGC mode,raster
Serial Cmd:
top,raster bottom,raster speed,laser framing status,laser on position,laser
off position,laser power, background color>
Important: Control Trigger 3 uses the External Trigger input. When this
input is active, there is no external trigger available to the scanner. Therefore,
when Control Trigger 3 is active and External Trigger Mode is selected, a
read cycle will be triggered by an active input from any of the control trigger
inputs.
Since an active state on one of the control inputs is required to trigger a
read cycle, sequence "000" would not be valid. When Control Trigger 3 is
active, the sequence starts at "001". This allows a maximum of
7 accessible database settings. When Control Trigger 3 is not active, the
sequence starts with all active inputs disabled.
9-6
Gain Settings,
Background Color
Active Trigger(s) = 1, 2, 3
Control Triggers
3 2 1
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
Tracking Adjustment,
individually.
Control Trigger (Optoelectric Control
Active Trigger(s) = 1, 2
Control Triggers
3 2 1
0 0
0 1
1 0
Disabled 1 1
N/A N/A
N/A N/A
N/A N/A
MS-890 Industrial Automation Scanner User Manual
Scan Speed,
Optoelectric Control, to
Active Trigger(s) = 1
Control Triggers
3 2 1
0
1
N/A
Disabled Disabled N/A
N/A
N/A
N/A