Bad Symbol Message; No Symbol Message - Microscan MS-890 User Manual

Bad Symbol Message

Usage: Useful in determining if a symbol is present and if user defined requirements
for that symbol are met. Can tell the user if a qualified symbol is present but
not decodable.
Definition: Sets the requirements that will qualify an object or a symbol before outputting a
decode or message. When enabled, sends a message to the host whenever
an object meets the qualifications setup but is not decoded.
Serial Cmd: <K715,[unused],message>
BAD_SYMBOL
Default:
Options: 1 to 128 ASCII characters

No Symbol Message

Usage: Useful in determining if a symbol is present and if user defined requirements
for that symbol are met. Can tell the user if an object does not qualify as a
symbol.
Sets the requirements that will qualify an object or a symbol before outputting a
Definition:
decode or message. When enabled, sends a message to the host whenever
an object meets the qualifications setup but is not decoded.
Serial Cmd: <K716,[unused],message>
Default: NO_SYMBOL
1 to 128 ASCII characters
Options:
MS-890 Industrial Automation Scanner User Manual
I/O Parameters
6-7