Beeper - Microscan MS-890 User Manual

Beeper

Beeper
Usage: Can be used as an audible verification that either a good read or a No Read
has occurred.
Definition: A beep is emitted either after each good read of a symbol or after each No
Read.
Note: Beeper will also sound if any of the following occur:
• The scanner is defaulted.
• A send/save command from ESP or an Exit command from any embedded
menu.
• A <Z>, <Zp>, <Zd>, or
Beeper Status
Serial Cmd: <K702,status>
Default: On Good Read
Options: 0 = Disabled
1 = On Good Read
2 = On No Read
6-12
<K701,,1>
command is sent.
MS-890 Industrial Automation Scanner User Manual