Configurable Output 2; Trend Analysis Output 2; Diagnostics Output 2 - Microscan MS-890 User Manual

Configurable Output 2

Configurable Output 2
Note: Output 2 has the same parameters and default settings as Output 1.
Serial Cmd: < K811,output on,output state,pulse width,output mode >

Trend Analysis Output 2

Note: Output On under Output 2 Parameters must be set to Trend Analysis for this output
to function.
< K781,trend analysis mode,trigger evaluation period,number to output
Serial Cmd:
on,decodes/trigger threshold >

Diagnostics Output 2

Note: Output On under Output 2 Parameters must be set to Diagnostic Warning for
this output to function.
Serial Cmd: <K791,over temperature,service threshold,unused,laser current high,laser
current low,low temperature>
6-28
MS-890 Industrial Automation Scanner User Manual