Configurable Output 3; Trend Analysis Output 3; Diagnostics Output 3 - Microscan MS-890 User Manual

Configurable Output 3

Note: Output 3 has the same parameters and default settings as Output 1 and Output 2.
Serial Cmd: < K812,output on,output state,pulse width,output mode >

Trend Analysis Output 3

Note: Output On under Output 3 Parameters must be set to Trend Analysis for this output
to function.
< K782,trend analysis mode,trigger evaluation period,number to output
Serial Cmd:
on,decodes/trigger threshold >

Diagnostics Output 3

Note: Output On under Output 3 Parameters must be set to Diagnostic Warning for
this output to function.
<K792,over temperature,service threshold,unused,laser current high,laser
Serial Cmd:
current low,low temperature>
MS-890 Industrial Automation Scanner User Manual
I/O Parameters
6-29