Microscan MS-890 User Manual page 187

Configuration Database by ESP
Click this button to bring up the Calibration view.
Then select the Configuration Database tab to
display the view shown below.
All the database settings in the
Save Settings to Configuration Database
To save index values by serial command, use the following:<K227+,database index>
Load Settings from Configuration Database
To load index values by serial command, use the following:<K227-,database index>
Request Configuration Database Settings
To request index values, use the following:<K227?,database index> or <K227?> for entire
database.
MS-890 Industrial Automation Scanner User Manual
<K227>
command can be configured in this graphic interface.
Calibration
9-7