Laser Current Warning - Microscan MS-890 User Manual

Laser Current Warning

Alerts the user to impending laser failure.
High Current Status
The High Current message is output whenever the laser current exceeds
Definition:
the factory-defined maximum. The message repeats once every 30
mimutes until the condition is eliminated.
Serial Cmd: <K411,high current
current message>
Disabled
Default:
Options: 0 = Disabled
1 = Enabled
High Current Message
Definition: This message is output whenever the laser current exceeds the factory-defined
maximum.
Serial Cmd: <K411,high current
current message>
Default: HIGH_LASER
Options: Any ASCII string up to 10 characters.
Low Current Status
Definition: The Low Current message is output whenever the laser current exceeds
the factory-defined minimum. The message repeats once every 30 mimutes
until the condition is eliminated.
Serial Cmd: <K411,high current status,high current
current message>
Default: Disabled
Options: 0 = Disabled
1 = Enabled
Low Current Message
Definition: This message is output whenever the laser current exceeds the factory-defined
minimum.
Serial Cmd: <K411,high current status,high current message,low current status,low
current
Default: LOW_LASER
Options: Any ASCII string up to 10 characters.
MS-890 Industrial Automation Scanner User Manual
status,high current message,low current status,low
status,high current
message>
message,low current status,low
message,low current
Diagnostics
status,low
8-7