Microscan MS-890 User Manual page 223

Enable Extended Read Rate Test for Single and Multisymbol
Sending <Ce> after
single and multiple symbols.
Extended Mode instructs the scanner to output the decode rate, the symbol data, and the
transition data.
The example below shows output with Postamble enabled and defined as Carriage
Return/Line Feed.
Decode rate
Note: The <Ce>
command has no immediate effect if not preceded by
End Read Rate Test
Sending <J> ends both the Percent test and the Decodes/Second test for both single
and multisymbol.
MS-890 Industrial Automation Scanner User Manual
<C> or <Cs> will generate a an extended mode that applies to both
Symbol data Number of bar/space
transitions
Utilities
<C> or <Cs>.
12-5