Microscan MS-890 User Manual page 35

Preferences > Advanced Tab
The Auto Sync options at the top of the Advanced tab allow you to determine whether
Auto Sync will be enabled automatically in sections of ESP where it is used, or if it will ask
you before it enables Auto Sync functions.
Always Ask Before Auto Sync Occurs
If you check this option box, you are then able to determine what specific Auto Sync
functions will be enabled. Receive Settings from the Reader will automatically send the
scanner's settings to ESP when Auto Sync is enabled. Send ESP Settings to the Reader
will automatically send all scanner configuration settings chosen in ESP to the scanner.
Do Not Send or Receive Settings creates a condition in which Auto Sync will not automatically
send scanner settings to ESP, or send ESP settings to the scanner.
Send XON with Autoconnect
Sends an XON (Begin Transmission) command to the scanner before starting the
Autoconnect routine.
Ask to Save ESP File when Quitting
When enabled, prompts the user to save a .esp file when ending a session.
The .esp file will be saved in
the location of your choice.
MS-890 Industrial Automation Scanner User Manual
Using ESP
2-9