Microscan MS-890 User Manual page 109

Check Character Type (Codabar)
Allows the user to select the check character type Codabar will use.
Definition:
Serial Cmd: <K471,status,start and stop match,start and stop output status,large intercharacter
gap,fixed symbol length status,fixed symbol
type,check character output status>
Default: Disabled
Options: 0 = Disabled
1 = Modulus 16
2 = NW 7
3 = Both
Modulus 16: Used in the photo-finishing market.
NW 7: Used in Japanese markets.
Check Character Output Status (Codabar)
For additional security a check character can be added to the symbol.
Usage:
Definition: When enabled, the check character character is sent along with the symbol
data. When disabled, symbol data is sent without the check character.
<K471,status,start and stop match,start and stop output status,large intercharacter
Serial Cmd:
gap,fixed symbol length status,symbol length,check character
character output
Default: Disabled
Options: 0 = Disabled
MS-890 Industrial Automation Scanner User Manual
status>
1 = Enabled
Symbologies
length,check character
type,check
5-15