Using Master Symbols - Microscan MS-890 User Manual

Using Master Symbols

Using Master Symbols
1. Set Triggering Mode to External or Serial (see
2. Set Matchcode Type to an option that fits your application (see
on page 7-5).
3. Define the output you want with your matchcode setup:
a) Data output
b) Discrete output (see
4. Select the number of master symbols you want to create. If more than one, send a
<K224,number of master symbols> command (see
5. Enter master symbol data in one of the following ways:
a) Use ESP to type in master symbol data directly into the Utilities menu.
b) Send a serial command with symbol data in the form of
data> (or <) data)>
c) Send a <Gmaster symbol number>
master symbol.
d) Enable the New Master Pin command and activate a discrete input to store the
next symbol scanned as the master symbol (see
7-4
(Symbol Data Output
Configurable Output 1
for single master symbol only).
Trigger on page 4-5).
on page 6-4).
on page 6-20).
Master Database
command to scan the next symbol as the
New Master Pin
MS-890 Industrial Automation Scanner User Manual
Matchcode Type
on page 12-11).
<Mmaster symbol#,
on page 7-11).