Microscan MS-890 User Manual page 206

Raster Setup
Raster Status
Definition: When disabled, the raster mirror will park at the top of the raster sweep.
Serial Cmd: <K506,raster
on/off>
Disabled
Default:
0 = Disabled
Options:
Note: Raster sweeps are only counted during a read cycle (continuous, triggered, and
read rate). Raster sweeps are NOT counted when the raster motor is parked, disabled, set
to straight line operation (top and bottom are equal), or when performing a self-calibration.
Top Offset
Decreasing the Top Offset value causes the top of the raster pattern to
Definition:
move up.
Serial Cmd: <K506,raster
on/off>
Default: 127
Options: 0 to 255
10-4
status,top offset,bottom offset,raster sweep rate,read cycle
1 = Enabled
status,top offset,bottom offset,raster sweep rate,read cycle
MS-890 Industrial Automation Scanner User Manual