Safety Instructions When Mounting And Installing The Control Cabinet; Directives - Siemens Sinamics S120 Manual

Cabinet design and EMC Booksize

12.2 Safety instructions when mounting and installing the control cabinet

12.2 Safety instructions when mounting and installing the control cabinet
Danger to life if the fundamental safety instructions and remaining risks are not carefully
observed
If the fundamental safety instructions and remaining risks in Chapter 1 (Page 25) are not
observed, accidents involving severe injuries or death may occur.
• Adhere to the fundamental safety instructions.
• When assessing the risk, take into account residual risks.
Risk of injury as a result of foreign bodies in the device
Parts (e.g.: drilling chips, end sleeves) falling into the device can cause short-circuits and
damage the insulation. This can result in severe injury (arcing, loud bang, parts that are
flung out).
• Only perform installation and other work when the devices are current-free.
• Cover the ventilation slots when mounting and installing the control cabinet and remove
12.3

Directives

The product satisfies the protection targets of the following EU Directives applicable within
the European Economic Area (EEA):
Table 12- 1 Directives
Directive
2006/95/EC
2004/108/EC
694
WARNING
WARNING
the cover before switching on.
Description
Directive of the European Parliament and Council of December 12, 2006, on the
approximation of the laws of the member states relating to electrical equipment designed for
use within certain voltage limits (Low-Voltage Directive).
Directive of the European Parliament and Council of December 15, 2004, which repeals
directive 89/336/EEC, on the approximation of laws of the member states relating to
electromagnetic compatibility (EMC Directive).
Booksize Power Units
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6