①
②
③
④
⑤
⑥
⑦
Figure 4-108 Mounting a Smart Line Module with cold plate on an external heat sink, using a 5 kW
Tightening torques:
● Firstly, only tighten the nuts by hand.
● Then tighten the nuts.
Booksize Power Units
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6
External heat sink (air or liquid)
M6 studs
Heat-conducting foil
Cold plate
M6 nut
Spring washer
Washer
Smart Line Module as an example
Tightening torque: 0.5 Nm
Tightening torque: 10 Nm
Line Modules Booksize
4.10 Smart Line Modules with cold plate
339