Emc-Compliant Design And Control Cabinet Configuration - Siemens SINAMICS S120 Equipment Manual

Standards
A number of standards relevant to application of the product are listed below.
Table 7- 4 Standards
Standard
EN ISO 12100-1 (01.11.2003)
EN ISO 12100-2 (01.11.2003)
EN ISO 13849-1 (01.11.2006)
EN 1037+A1 (01.04.2008)
IEC 61800-5-1 (01.09.2007)
EN 60204–1
EN 60439–1
EN 60529
EN 61800–3
UL 508C
7.2

EMC-compliant design and control cabinet configuration

For detailed configuration instructions regarding the EMC-compliant design of drives and
control cabinet configuration, refer to the "SINAMICS Low Voltage Configuration Manual".
Chassis power units
Manual, (GH3), 10/2008, 6SL3097-2AE00-0BP3
7.2 EMC-compliant design and control cabinet configuration
Description
Safety of machinery
Basic concepts, general principles for design
Part 1: Basic terminology, methodology
Safety of machinery
Basic concepts, general principles for design
Part 2: Technical principles
Safety of machinery
Safety-related parts of control systems
Part 1: General design principles
Safety of machinery
Prevention of unexpected startup
Adjustable-speed electrical power drive systems
Part 5-1: Safety requirements – Electrical, thermal, and energy
Safety of machinery
Electrical equipment of machines
Part 1: General requirements
Low-voltage switchgear and controlgear assemblies
Part 1: Type-tested and partially type-tested assemblies
Degrees of protection provided by enclosures (IP code)
Adjustable speed electrical power drive systems
Part 3: EMC product standard including specific test methods
Power conversion equipment
Cabinet design and EMC
249