Siemens Sinamics S120 Manual page 7

Usage phase
Maintenance/servicing
References
Target group
This documentation is intended for machine manufacturers, commissioning engineers, and
service personnel who use the SINAMICS drive system.
Benefits
This manual describes all the information, procedures and operational instructions required
for commissioning and servicing SINAMICS S120.
Standard scope
The scope of the functionality described in this document can differ from that of the drive
system that is actually supplied.
● It may be possible for other functions not described in this documentation to be executed
● Functions that are not available in a particular product version of the drive system may be
● Extensions or changes made by the machine manufacturer must be documented by the
For reasons of clarity, this documentation does not contain all of the detailed information on
all of the product types, and cannot take into consideration every conceivable type of
installation, operation and service/maintenance.
Technical Support
Country-specific telephone numbers for technical support are provided on the Internet at
Contact:
http://www.siemens.com/automation/service&support
EC Declaration of Conformity
The EC Declarations of Conformity for the machinery directive can be found on the Internet
at:
http://support.automation.siemens.com/WW/view/de/21901735/67385845
Alternatively, you can contact the Siemens office in your region in order to obtain the EC
Declaration of Conformity.
Booksize Power Units
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6
in the drive system. However, no claim can be made regarding the availability of these
functions when the equipment is first supplied or in the event of servicing.
described in the documentation. The functionality of the supplied drive system should
only be taken from the ordering documentation.
machine manufacturer.
Document/tool
SINAMICS S120 Commissioning Manual
•
SINAMICS S120/S150 List Manual
•
SINAMICS S120/S150 List Manual
•
Preface
7