Connecting A Direct Measuring System; Combined Use Of Motion-Connect 500 And Motion-Connect 800Plus - Siemens Sinamics S120 Manual

Booksize power units

Hide thumbs Also See for Sinamics S120:

Table of Contents

Cabinet design and EMC Booksize

12.8 Connection systems

Connecting a direct measuring system

The various options of connecting a direct measuring system with DRIVE-CLiQ ASIC and

M12 plug via MOTION-CONNECT cables to a DRIVE-CLiQ component are shown in the

following diagram.

1. Direct connection via the basic cable

2. Basic cable and 1-2 extensions

3. Basic cable, cabinet bushing and a maximum of one extension

Figure 12-25 Connecting a direct measuring system with M12 plug to a DRIVE-CLiQ component with

In principle, MOTION-CONNECT 500 cables and MOTION-CONNECT 800PLUS cables be

used together.

Basic cables and extensions for MOTION-CONNECT cables with DRIVE-CLiQ connector

and M12 socket can be combined without any restrictions.

For the combined use of MOTION-CONNECT cables with DRIVE-CLiQ connectors, the

conditions below apply.

M12 socket (IP67) connected to a MOTION-CONNECT DRIVE-CLiQ signal cable

M12 plug (IP67) connected to a MOTION-CONNECT DRIVE-CLiQ signal cable

M12 plug (IP67) connected to a third-party measuring system

DRIVE-CLiQ cabinet bushing M12

RJ45 socket (IP20)

Booksize Power Units

Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6