Mounting - Siemens Sinamics S120 Manual

Booksize power units

Hide thumbs Also See for Sinamics S120:

Table of Contents

Line Modules Booksize

4.10 Smart Line Modules with cold plate

Mounting

Please note the following before mounting a Smart Line Module with cold plate on a

customer-specific heat sink:

● Before mounting, check the surface of the heat sink to ensure that it is not damaged.

● To improve heat transfer, a heat-conducting medium must be used. Special spherical-

indented heat-conducting foil must be used for this purpose. Every cold plate power unit

is supplied with heat-conducting foil cut to the right size. Note the mounting position of the

heat-conducting foil (see figures below).

• Also replace the heat-conducting foil when replacing a component.

• Only use heat-conducting foil released or supplied by Siemens.

Heat-conducting foil, 50 mm

M6 studs and hexagon nuts or grub screws (ISO 7436-M6x40-14 H, property class 8.8) are

recommended for mounting the components.

Order number

6SL3162-6FB00-0AA0

Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6

Booksize Power Units