Installation - Siemens Sinamics S120 Manual

Motor Modules Booksize
6.2 Motor Modules with internal air cooling
6.2.6

Installation

Motor Modules are designed for installation in the control cabinet. They are fixed to the
control cabinet panel or a mounting panel using M6 screws.
①
②
③
Figure 6-10
Tightening torques:
● Firstly, tighten the nuts by hand.
Tightening torque: 0.5 Nm
● Then tighten the nuts in the specified sequence 1 to 4.
Tightening torque: 6 Nm
384
Control cabinet panel/mounting panel
Washer
M6 screw
Installation of a Motor Module with internal air cooling (example 45 A)
Booksize Power Units
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6