Remove the upper and lower right-
hand DC link screws.
Table 11- 17 Installing the DC link rectifier adapter and 24 V terminal adapter
Attach and screw (upper and lower
screws) the DC link rectifier adapter at
the right-hand side of the component
using the original M4x20 screws.
Booksize Power Units
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6
Do NOT use the screw holes at the left-
hand side of the component.
11.4 DC link rectifier adapter for Booksize format
To install the DC link rectifier adapter, it
is essential to leave the DC link
①
busbars
(hold firmly to prevent them falling out).
Attach and screw on the
24 V terminal adapter using the
associated screw (provided in the
accessories pack).
Accessories
②
and
in the components
659